This water drill pump is ideal for draining small ponds, fish tanks, small pools or even a flooded basement. Self-priming drill pump can be used to pump water from virtually anywhere. Not recommended for pumping oils.
- Ideal for transferring water from one source to another
- Self-priming up to 9 feet
- 3/8″ shank fits all common chucks
- Unit pumps up to 750 gallons per hour
- Designed to work with most electrical drills with a maximum speed of 2,800 RPM
- Designed to work with most electrical drills with a maximum speed of 2,800 RPM
- Pump Usage: Do not run the pump dry. Never run the DrillPump in reverse.
- Greasing the Pump: For longer life, re-grease the pump after every use with silicone grease. To apply the grease, remove the black housing screws, add a bit of silicone grease on the housing where the rubber fan blades touch, then reassemble. Do not use spray lubricants, such as WD-40, as they do not provide sufficient lubrication for this product and can cause damage to the internals of the pump.
- Safety Warning: Do not get the drill wet or use the drill pump with flammable liquids
















Reviews
There are no reviews yet.